AMSOIL 2 Cycle Oil Two Cycle Oils

AMSOIL 2 Cycle Oil Two Cycle Oils provide second-to-none protection and performance in modern two-cycle equipment!

Two-cycle engines remain the workhorses in recreational equipment, including outboard motors, motorcycles, snowmobiles and personal watercraft, as well as in lawn and garden applications like lawn mowers and weed eaters. amsoil 2 cycle oil two cycle oils.

Amsoil Saber VS Stihl OEM Oil Test results. AMSOIL Synthetic 100:1 2-Cycle Oils have been providing improved performance and protection in two-cycle motors since 1973. However, there are still consumers who struggle with the notion that Saber provides optimum protection at 100:1 when the equipment manufacturer has specifi ed a 50:1 mix ratio. In order to once again demonstrate the superiority of AMSOIL Synthetic 2-Cycle Oils, AMSOIL provided a logging company with six Stihl MS 440 chainsaws. Three of the saws were operated using the manufacturerrecommended two-cycle oil at the recommended mix ratio (50:1). The other three saws had AMSOIL Saber Professional installed at a mix ratio of 100:1. The loggers used all six saws as they normally would for 200 hours.

Click Here For the Amsoil Saber VS Stihl Oil story


DOMINATOR Injection oil	HP INJECTOR	INTERCEPTOR	SABER PRE-MIX

Saber Outboard

Snowmobile Product brochure

AMSOIL® Synthetic 2-Cycle Oil Recommendations Chart

Design changes over recent years have included direct fuel injection engines, in which fuel is injected directly into the combustion chamber, and exhaust power valves, which improve combustion efficiency at varying RPM. These design changes have allowed two-cycle engine manufacturers to effectively reduce emissions, improve fuel efficiency and decrease oil consumption.

Today's two-cycle motors of all types require specialized oil technology to deliver maximum engine protection, dependable operation and long service life. AMSOIL 2 Cycle Oil Two Cycle Oils

As the leader in two-cycle oil technology, AMSOIL has performed extensive research in developing a new line of revolutionary, specialized oils called the "Fabulous Four." AMSOIL 2 Cycle Oil Two Cycle Oils.

Synthetic 2-Cycle Oil (AIT) was the first new oil to be introduced. It is primarily recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel injected (EFI) and direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles and ATV's. Formulated with wax-free premium quality synthetic esters and a specialized additive package, INTERCEPTOR is designed to address the exhaust valve sticking problems associated with certain snowmobile models. New AMSOIL HP Injector Synthetic 2-Cycle Oil (HPI), DOMINATOR Synthetic 2-Cycle Racing Oil (TDR) and Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils complete the Fabulous Four lineup, replacing AMSOIL Synthetic 2-Cycle Injector Oil, Series 2000 Synthetic 2-Cycle Racing Oil and 100:1 Pre-Mix Synthetic 2-Cycle Oil, respectively. The application chart Above ranks each oil's performance in common two-cycle applications.

AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil (AIT) was the first new oil to be introduced. It is primarily recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel injected (EFI) and direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles and ATV's.

AMSOIL DOMINATOR is recommended for use in high performance stock or modified

two-cycle motors, including air or liquid cooled snowmobiles, personal watercraft, motorcycles (Moto X), ATV's, go-carts and outboard motors*. Good for use with coated or non-coated pistons, high-octane racing fuels and exhaust power valves. Compatible with most other two-cycle oils, however, mixing oils should be minimized.

AMSOIL HP Injector is recommended for use in all two-cycle outboard motors including, but not limited to, Mercury® EFI & Optimax®, Johnson® and Evinrude® FICHT® and E-TEC™, Yamaha® HPDI, Nissan® and Tohatsu® TLDI®, Suzuki®, Mariner® and Force® . Also recommended for use in all two-cycle personal watercraft and jet boats, as well as snowmobiles, motorcycles and ATVs.

Use as injection oil or as 50:1 pre-mix (2.6 oz. per U.S. gallon of gas) where NMMA TC-W3 or API TC oils are specified. Compatible with mineral and synthetic TC-W3 type two-cycle oils, however, mixing two-cycle oils should be minimized.

IF YOU WOULD LIKE TO GO DIRECTLY TO ONE OF THE PRODUCT PAGES BELOW TO ORDER OR GET MORE INFORMATION PLEASE DO SO BY SELECTING A CATEGORY.

NOTE: TO UTILIZE THE FREE SHIPPING, PICK A CATEGORY AND FOLLOW THESE STEPS. WHEN THE NEW WEB WINDOW APPEARS, CLICK ON THE TAB THAT SAYS "CONTINUE SHOPPING". YOU WILL BE TAKEN TO THE ONLINE STORE TO MAKE YOUR PURCHASE OR GET MORE DETAILS ON THE PRODUCT'S.

NOTE: TO GET DEALER PRICES, CHOOSE THE "BUY WHOLESALE" OPTION IN THE NEXT WINDOW AFTER YOU PICK A CATEGORY BELOW. TO ADD THE PREFERRED CUSTOMER DISCOUNT TO YOUR SHOPPING CART, CLICK ON THE "SAVE 25%" LOGO ON THE PAGE THAT COMES UP. YOU WILL RECEIVE THE WHOLESALE DISCOUNT ONCE YOU ADD THE P.C. DISCOUNT TO YOUR CART, WHOLESALE PRICING WILL BE DISPLAYED FOR YOUR ORDER. 6 MONTH TRIAL, OR 1 YEAR MEMBERSHIPS ARE AVAILABLE.

REQUEST THE PRICING AND PREFERRED CUSTOMER DISCOUNT EMAIL BY SELECTING ENTERING YOUR NAME AND EMAIL. CLICK HERE